Decrypting Brake Pad Edge Codes
Guideline To Visually Inspecting A Shock Or Strut
Understanding EV Wheel Hub Bearings
PRT & PRT HEAVY DUTY To Exhibit at “The Group” Annual Member Expo
Steer Into the Future with Delphi Technologies by Your Side
Decrypting Brake Pad Edge Codes
Guideline To Visually Inspecting A Shock Or Strut
Understanding EV Wheel Hub Bearings
PRT & PRT HEAVY DUTY To Exhibit at “The Group” Annual Member Expo
Steer Into the Future with Delphi Technologies by Your Side
Sponsored By NGK Spark Plugs
Do the letters “GDI” scare you? If gasoline direct injection or GDI has you avoiding diagnostics and repairs on late-model vehicles, we have some training for you! In this 45-minute webinar, experts will help you understand GDI systems from the strainer in the tank to the nozzles in the combustion chamber.
At the end of the webinar, you will have a better understanding of how a GDI fuel system operates, so you have a solid diagnostic foundation.
Speakers Jeff Boehler, Director of Engineering/Chief Engineer, Autolite Andrew Markel, Director of Content, ShopOwner
Brake & Front End serves repair shops conducting a high volume of undercar repairs by providing application-specific technical information and solutions to address emerging trends in the undercar repair segment. By subscribing, you’ll receive the ShopOwner digital edition magazine (12 times/year) featuring articles from Brake & Front End and the Brake & Front End eNewsletter (twice weekly). Access to digital editions, contests, news, and more are ready for you today!
Brake & Front End serves repair shops conducting a high volume of undercar repairs by providing application-specific technical information and solutions to address emerging trends in the undercar repair segment. By subscribing, you’ll receive the ShopOwner digital edition magazine (12 times/year) featuring articles from Brake & Front End and the Brake & Front End eNewsletter (twice weekly). Access to digital editions, contests, news, and more are ready for you today!
Follow along to learn how to properly remove and replace a strut assembly. This video is sponsored by PRT.
Don’t settle for “almost” - it matters where the engine is manufactured or remanufactured. Sponsored by ACDelco.
GM transmissions and transfer cases are unique to each individual vehicle. This video is sponsored by ACDelco.
Don’t settle for “almost” - it matters where the engine is manufactured or remanufactured. Sponsored by ACDelco.
Click here to view past issues.
The core controls for most AWD systems are the ABS, traction control and stability control components.
Many AWD systems came onto the market in the 1990s. Unlike 4×4 truck systems of the day, these systems were always engaged. Many of the early systems used electro-mechanical ways to manage the distribution of power to the four wheels.
Most of these systems used viscous differentials and limited slip differentials with special fluids inside. These components were prone to failure and are expensive to manufacture. Also, the performance of these systems could be challenging to control with sensors and actuators.
Around 2004, many manufacturers of AWD systems started to abandon complex transfer case center differentials in favor of less expensive clutches. Many vehicles were no longer equipped with limited slip differentials. Instead, they were equipped with open differentials. Drivers never noticed the change or felt a loss in off-road or winter road capabilities. So, what happened?
Many of these AWD systems were able to utilize the brakes and sensors in the wheel ends to better control wheel slip. The basic principle is that with an open differential if you lock one side, the power transfers to the other side.
Transfer case designs were simplified and put the control in the clutches and planetary gears. These changes helped reduce cost while making the system more reliable.
The core controls for most AWD systems are the ABS, traction control and stability control (which uses the ABS brake modulator to control traction). The brake hydraulic control module on these vehicles has at least 12 valves. With these control channels, an AWD with open differentials can perform like it has limited-slip differentials. Passive or open differentials transfer the power to the wheel(s) that is spinning the fastest, or the wheel that is on the ring-gear side of the differential. These systems use the brake calipers to apply pressure to the spinning wheel and send power to the opposite side of the differential. This can evenly distribute the power to the rear or front axles under a variety of conditions.
The corrections are very fast pulsations of the brakes that are undetectable by the driver. If the car or truck is accelerating hard from a stop, the system will apply the brakes independently to prevent slipping. Even if the driver turns off the stability control, the brakes will manage the rear axle, so it performs like a limited-slip differential. If the vehicle is in snow or mud, it can control the traction with the brakes so the differential acts like it is locked.
The torque vectoring differentials can control the amount of power going to each wheel connected to the axle. Some high-horsepower front-wheel-drive vehicles have a basic torque vectoring differential (like the Ford Fiesta RS) to control torque steer.
Torque vectoring differentials can work together with the stability control system and PCM to maximize traction during acceleration. It can be used during off-road and on-road situations at a wide range of speeds. The main inputs are the steering position sensor and yaw sensor. The differential control module makes corrections by determining where the driver wants to go and where the vehicle is going to make a correction.
This rear differential can control the power to the rear wheels. These differentials can act like a locking, limited-slip or open differential with only a change of the electronically controlled clutches.
Torque vectoring differentials have another advantage — they can disconnect a drive axle better than any locking hub. Decoupling an axle with clutch packs reduces rotating mass in the driveline and increases fuel mileage. The system will then decouple the center differential. On some vehicles, the driveshaft can be uncoupled from both the transmission and rear/front differential. This decoupling of the driveline can reduce rotating mass and load on the engine. This is all performed in milliseconds, and the driver does not feel even the slightest vibration.
Modern AWD systems need the foundation brake system and wheel bearing hubs with accurate wheel speed sensors to be in proper working order to function. This means that the pads and rotors must be able to produce enough friction to carry out the corrections. Issues with wheel bearings and seized calipers can result in less-than-optimal corrections.
Any leaks from the transmission, transfer case or differential should be taken seriously. Damage can occur if the fluid drops to a critical level. The most common leaks can be found around the driveshaft and axle seals.
Sometimes, there will be oil leakage at the seam between the automatic transmission and the transfer case; it can occur around the entire seam. If droplets can be seen, seal the areas with black sealant in the vicinity of the propeller shaft to the front axle transmission. If the problem is a “sweating” leak, sealing must not be carried out, as this is a normal phenomenon inherent in the design of oil-filled systems. If there are any leaks in the differential transfer case, check the vents and breathers. The seals can leak and fail if the case is over pressurized.
Drivetrain: Nissan CVT Clutch Point Relearn Procedure
Drivetrain: All About Engine Timing Chains
Drivetrain: 10 Timing Belt Tips
Drivetrain: Seven CV Joint Mistakes You Shouldn’t Make